About Williams County Fire and EMS Frequencies
Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Williams County Fire talkgroup 53210 (hex cfda).
- Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Williams County, start with the Williston Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 853.2625, 853.8125 MHz.
Data updated .
Williams County trunked talkgroups
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Williams County Fire | County Fire/EMS Main Dispatch | 53210 | cfda | T |
| Williams County Fire | County Fire/EMS Main Dispatch | 53211 | cfdb | T |
| Williams County- City of Williston | Williston Airport Fire | 53208 | cfd8 | T |
| Williams County Fire | County Fire Operations | 53212 | cfdc | T |
| Williams County Fire | County Fire Operations | 53213 | cfdd | T |
| Williams County Fire | County Fire Operations | 53214 | cfde | T |
| Williams County- City of Williston | Sanford Williston Air EVAC | 53805 | d22d | T |
| Williams County Hospital | Tioga Medical Center ER | 53802 | d22a | T |
| Williams County- City of Williston | St Alexis Williston ER | 53801 | d229 | T |
| Williams County- City of Williston | Sanford Williston ER | 53803 | d22b | T |
Radio system sites in Williams County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Williams County
- Alamo
- Athens
- Barr Butte
- Big Meadow
- Big Stone
- Blacktail
- Blue Ridge
- Bonetraill
- Brooklyn
- Buford
- Bull Butte
- Champion
- Climax
- Dry Fork
- Dublin
- East Fork
- Ellisville
- Epping
- Equality
- Farmvale
- Good Luck
- Grenora
- Hardscrabble
- Hazel
- Hebron
- Judson
- Lindahl
- Long Creek
- Marshall
- McGregor
- Missouri Ridge
- Mont
- New Home
- Oliver
- Orthell
- Pherrin
- Pleasant Valley
- Rainbow
- Ray
- Rock Island
- Round Prairie
- Sauk Valley
- Scorio
- South Meadow
- Springbrook
- Stony Creek
- Strandahl
- Tioga
- Trenton
- Truax
- Twelve Mile
- Tyrone
- View
- West Bank
- Wheelock
- Wildrose
- Williston
- Winner
Common questions
Do fire departments and EMS use a trunked radio system in Williams County?
Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Williams County?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Williams County?
For Williams County, start with the Williston Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.2625, 853.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Williams County fire and EMS talkgroups encrypted?
None of the 10 talkgroups listed for Williams County are marked encrypted.