Skip to content

Ward County Fire and EMS Frequencies

Ward County in North Dakota has 2 countywide conventional frequencies and 14 countywide talkgroups in our database. Use the list of 63 cities and communities below for local fire departments and EMS agencies.

About Ward County Fire and EMS Frequencies

Quick answer: Fire dispatch for Ward County: Ward County Fire 155.6250 MHz, narrow FM, 192.8 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Ward County Fire talkgroup 51211 (hex c80b).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ward County, start with the Minot Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 852.1625, 852.3875 MHz.

Data updated .

Ward County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ward County FireFire/EMS Dispatch155.6250
In 158.9700
192.8 PLFMNWQFB629

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ward County FireWard County Fire – Fire Ground158.7300
In 155.8350
151.4 PLFMNWPQX814

Ward County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Ward County FireMinot Rural Fire Department51211c80bT
Ward County FireCounty Fire/EMS Main51213c80dT
Ward County- City of MinotMinot Airport Fire Dispatch51208c808T
Ward County FireMinot Rural Fire Training51212c80cT
Ward County FireCounty Fire/EMS Operations51214c80eT
Ward County FireCounty Fire/EMS Operations51215c80fT
Ward County FireCounty Fire/EMS Operations51216c810T
Ward County FireCounty Fire/EMS Operations51217c811T
Ward County FireCounty Fire/EMS Operations51218c812T
Ward County FireCounty Fire/EMS Operations51219c813T
Ward County- City of MinotTrinity Ambulance Operations51302c866T
Ward County- City of MinotTrinity Ambulance Main51301c865T
Ward County- City of MinotTrinity Ambulance Operations51303c867T
Ward County- City of MinotTrinity Hospital Minot ER51801ca59T

Radio system sites in Ward County

Program the control channel first; your scanner finds the voice channels from it.

Minot Metro Simulcast · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 3 (hex 3) · NAC A62
Control 852.1625, 852.3875
Voice 851.6625, 851.8875
Ryder · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 37 (hex 25) · NAC A64
Control 853.5875, 853.8125
Voice 853.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ward County

Common questions

What frequency does the fire department use in Ward County?

Fire dispatch channels listed for Ward County: Ward County Fire 155.6250 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Ward County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ward County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ward County?

For Ward County, start with the Minot Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.1625, 852.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ward County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Ward County are marked encrypted.

Are Ward County fire and EMS talkgroups encrypted?

None of the 14 talkgroups listed for Ward County are marked encrypted.