Skip to content

Walsh County Fire and EMS Frequencies

Walsh County in North Dakota has 5 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 47 cities and communities below for local fire departments and EMS agencies.

About Walsh County Fire and EMS Frequencies

Quick answer: Fire dispatch for Walsh County: Walsh County Fire 155.0550 MHz, narrow FM, 110.9 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Walsh County Fire talkgroup 50205 (hex c41d).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Walsh County, start with the Grafton site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 853.7375 MHz.

Data updated .

Walsh County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Walsh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walsh County FirePaging EMS/Fire – County Services155.0550
In 158.8350
110.9 PLFMNKNNU593
Walsh County FireCounty Fire/EMS Services155.8200
In 153.9800
NAC 455P25KDV388

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Walsh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walsh County FireHoople Fire Department154.0700CSQFMNWNXV602
Walsh County FirePark River Fire Department158.8650FMNWPCH798

EMS Tactical

EMS Tactical frequencies for Walsh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walsh County EMSValley Ambulance Service – Grafton155.2800CSQFMNKY7708

Walsh County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Walsh County FireCounty Fire/EMS Dispatch50205c41dT

Radio system sites in Walsh County

Program the control channel first; your scanner finds the voice channels from it.

Grafton · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 63 (hex 3F)
Control 853.7375
Voice 853.0625, 853.2875
Fordville · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 111 (hex 6F)
Control 853.7875
Voice 853.3375, 853.5625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Walsh County

Common questions

What frequency does the fire department use in Walsh County?

Fire dispatch channels listed for Walsh County: Walsh County Fire 155.0550 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Walsh County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Walsh County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Walsh County?

For Walsh County, start with the Grafton site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Walsh County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Walsh County are marked encrypted.

Are Walsh County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Walsh County are marked encrypted.