About Traill County Fire and EMS Frequencies
Quick answer: EMS dispatch for Traill County: Traill County EMS 153.5225 MHz, narrow FM, 146.2 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Traill County Fire talkgroup 49203 (hex c033).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Traill County, start with the Hillsboro site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 852.1, 852.325 MHz.
Data updated .
Traill County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Traill County Fire | Hatton Fire | 154.4450 | FMN | WPXV215 | |
| Traill County Fire | Hillsboro Fire | 155.8650 | FMN | WNQK489 | |
| Traill County Fire | Hatton FIre Department | 156.1200 | FMN | WQPH685 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Traill County EMS | F-M Ambulance Service – Hillsboro | 153.5225 In 159.9750 | 146.2 PL | FMN | WQWN978 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Traill County EMS | West Trail Ambulance | 155.2125 | FMN | WQMN212 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Traill County Hospital | Hillsboro Med. Center | 155.2950 | FMN | KVV695 | |
| Traill County Hospital | Mayville Hospital | 155.3550 | 210.7 PL | FMN | KWF811/EXP. |
Traill County trunked talkgroups
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Traill County Fire | Traill/Steele Fire/EMS Dispatch | 49203 | c033 | T |
| Traill County EMS | EMS Operations | 49301 | c095 | T |
Radio system sites in Traill County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Traill County
Common questions
What frequency does EMS or the ambulance service use in Traill County?
EMS dispatch channels listed for Traill County: Traill County EMS 153.5225 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Traill County?
Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Traill County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Traill County?
For Traill County, start with the Hillsboro site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.1, 852.325 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Traill County fire and EMS frequencies encrypted?
None of the 7 conventional frequencies listed for Traill County are marked encrypted.
Are Traill County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Traill County are marked encrypted.