Skip to content

Stark County Fire and EMS Frequencies

Stark County in North Dakota has 1 countywide conventional frequency and 15 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Stark County Fire and EMS Frequencies

Quick answer: Fire dispatch for Stark County: Stark County Fire 154.4150 MHz, narrow FM, CSQ. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Stark County Fire talkgroup 45207 (hex b097).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Stark County, start with the Dickinson Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 853.6375, 853.8625 MHz.

Data updated .

Stark County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Stark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stark County FireCounty Fire154.4150
In 154.0100
CSQFMNKNIT775

Stark County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Stark County FireCounty Fire/EMS Main45207b097T
Stark County FireCounty Fire/EMS Operations45208b098T
Stark County FireCounty Fire/EMS Operations45209b099T
Stark County FireCounty Fire/EMS Operations45210b09aT
Stark County FireCounty Fire/EMS Operations45211b09bT
Stark County FireCounty Fire/EMS Operations45212b09cT
Stark County FireCounty Fire/EMS Operations45213b09dT
Stark County FireCounty Fire/EMS Operations45214b09eT
Stark County FireDickinson Rural Fire Department45217b0a1T
Stark County EMSCounty EMS Main45302b0f6T
Stark County- City of DickinsonDickinson Metro Ambulance Main45301b0f5T
Stark County- City of DickinsonSanford Airmed Dickinson Dispatch45803b2ebD
Stark County EMSCounty EMS Operations45303b0f7T
Stark County EMSCounty EMS Operations45304b0f8T
Stark County HospitalCHI St Alexius Health ER Dickinson45801b2e9T

Radio system sites in Stark County

Program the control channel first; your scanner finds the voice channels from it.

Dickinson Metro Simulcast · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 5 (hex 5) · NAC A64
Control 853.6375, 853.8625
Voice 853.1875, 853.4125
Dickinson State Tower · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 14 (hex E)
Control 852.0875, 852.3125
Voice 851.8125
Gladstone · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 56 (hex 38)
Control 852.1125, 852.3125
Voice 851.8375
Hebron · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 88 (hex 58) · NAC A67
Control 853.5125, 853.7375
Voice 853.2875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Stark County

Common questions

What frequency does the fire department use in Stark County?

Fire dispatch channels listed for Stark County: Stark County Fire 154.4150 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Stark County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 15 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Stark County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Stark County?

For Stark County, start with the Dickinson Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.6375, 853.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Stark County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Stark County are marked encrypted.

Are Stark County fire and EMS talkgroups encrypted?

None of the 15 talkgroups listed for Stark County are marked encrypted.