Skip to content

Sargent County Fire and EMS Frequencies

Sargent County in North Dakota has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 29 cities and communities below for local fire departments and EMS agencies.

About Sargent County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sargent County: Sargent County Fire 155.0250 MHz, narrow FM, 110.9 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sargent County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sargent County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sargent County FireSargent County Fire – Fire – EMS Dispatch155.0250
In 155.8050
110.9 PLFMNKXM899

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sargent County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sargent County FireForman Fire Department155.5275FMNWQOE443

Radio system sites in Sargent County

Program the control channel first; your scanner finds the voice channels from it.

Cayuga · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 9 (hex 9) · NAC A68
Control 852.0875, 852.3125
Voice 851.8125
Stirum · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 93 (hex 5D) · NAC A6C
Control 853.7375
Voice 852.5625, 853.5125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sargent County

Common questions

What frequency does the fire department use in Sargent County?

Fire dispatch channels listed for Sargent County: Sargent County Fire 155.0250 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Sargent County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sargent County?

For Sargent County, start with the Cayuga site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.0875, 852.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sargent County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Sargent County are marked encrypted.