Skip to content

Pierce County Fire and EMS Frequencies

Pierce County in North Dakota has 5 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Pierce County Fire and EMS Frequencies

Quick answer: Fire dispatch for Pierce County: Pierce County Fire 155.8200 MHz, narrow FM, 114.8 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Pierce County Fire talkgroup 35203 (hex 8983).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pierce County, start with the Esmond site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 853.7375 MHz.

Data updated .

Pierce County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FireSheriff & Fire/EMS Dispatch155.8200
In 153.9800
114.8 PLFMNKEL527

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FireRugby Fire Department154.3400CSQFMNWNXR955

Hospitals & Medical

Hospitals & Medical frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County HospitalGood Samaritan Hospital155.1750CSQFMNWPQY748
Pierce County HospitalGood Samaritan Hospital155.3400CSQFMNWPQY748
Pierce County HospitalGood Samaritan Hospital461.3750
In 466.3750
CSQFMNKNJD831

Pierce County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Pierce County FireCounty Fire/EMS Main352038983T
Pierce County FireCounty Fire/EMS Operations352048984T
Pierce County FireCounty Fire/EMS Operations352058985T
Pierce County FireCounty Fire/EMS Operations352068986T
Pierce County FireCounty Fire/EMS Operations352078987T
Pierce County EMSCounty EMS Operations3530189e5T
Pierce County EMSCounty EMS Operations3530289e6T

Radio system sites in Pierce County

Program the control channel first; your scanner finds the voice channels from it.

Esmond · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 18 (hex 12) · NAC A61
Control 853.7375
Voice 853.2875, 853.5125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pierce County

Common questions

What frequency does the fire department use in Pierce County?

Fire dispatch channels listed for Pierce County: Pierce County Fire 155.8200 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Pierce County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pierce County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pierce County?

For Pierce County, start with the Esmond site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pierce County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Pierce County are marked encrypted.

Are Pierce County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Pierce County are marked encrypted.