About Oliver County Fire and EMS Frequencies
Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Oliver County Fire talkgroup 33203 (hex 81b3).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Oliver County, start with the Hannover site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 852.1875, 852.4125 MHz.
Data updated .
Oliver County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oliver County Fire | County Fire | 154.2350 | FMN | WNCJ704 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oliver County EMS | County Ambulsnce Service | 155.2200 | FMN | KNHY742 |
Oliver County trunked talkgroups
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Oliver County Fire | County Fire/EMS Main | 33203 | 81b3 | T |
| Oliver County Fire | County Fire/EMS Operations | 33204 | 81b4 | T |
| Oliver County Fire | County Fire/EMS Operations | 33205 | 81b5 | T |
| Oliver County Fire | County Fire/EMS Operations | 33206 | 81b6 | T |
| Oliver County Fire | County Fire/EMS Operations | 33207 | 81b7 | T |
| Oliver County EMS | County EMS Operations | 33301 | 8215 | T |
| Oliver County EMS | County EMS Operations | 33302 | 8216 | T |
Radio system sites in Oliver County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Oliver County
Common questions
Do fire departments and EMS use a trunked radio system in Oliver County?
Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Oliver County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Oliver County?
For Oliver County, start with the Hannover site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.1875, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Oliver County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Oliver County are marked encrypted.
Are Oliver County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for Oliver County are marked encrypted.