Skip to content

Mountrail County Fire and EMS Frequencies

Mountrail County in North Dakota has 2 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 51 cities and communities below for local fire departments and EMS agencies.

About Mountrail County Fire and EMS Frequencies

Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Mountrail County Fire talkgroup 31203 (hex 79e3).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Mountrail County, start with the Parshall site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 853.9125 MHz.

Data updated .

Mountrail County conventional frequencies

Hospitals & Medical

Hospitals & Medical frequencies for Mountrail County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mountrail County HospitalMountrial County Medical Center155.3850FMNWPMN242
Mountrail County HospitalMountrial County Medical Center163.2500FMNWPMN242

Mountrail County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Mountrail County FireCounty Fire/EMS Main3120379e3T
Mountrail County FireCounty Fire/EMS Operations3120479e4T
Mountrail County FireCounty Fire/EMS Operations3120579e5T
Mountrail County FireCounty Fire/EMS Operations3120679e6T
Mountrail County FireCounty Fire/EMS Operations3120779e7T
Mountrail County EMSCounty EMS Operations313017a45T
Mountrail County EMSCounty EMS Operations313027a46T

Radio system sites in Mountrail County

Program the control channel first; your scanner finds the voice channels from it.

Parshall · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 57 (hex 39)
Control 853.9125
Voice 853.4625, 853.6875
Blaisdell · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 61 (hex 3D) · NAC A6C
Control 852.1375, 852.3625
Voice 851.8625
Stanley · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 113 (hex 71)
Control 853.8625
Voice 853.4125, 853.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Mountrail County

Common questions

Do fire departments and EMS use a trunked radio system in Mountrail County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Mountrail County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Mountrail County?

For Mountrail County, start with the Parshall site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Mountrail County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Mountrail County are marked encrypted.

Are Mountrail County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Mountrail County are marked encrypted.