Skip to content

Morton County Fire and EMS Frequencies

Morton County in North Dakota has 1 countywide conventional frequency and 13 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Morton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Morton County: Morton County Fire 155.6250 MHz, narrow FM, 162.2 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Morton County Fire talkgroup 30206 (hex 75fe).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Morton County, start with the New Salem site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 852.2625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Morton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Morton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morton County FireCounty Fire Departments X3155.6250
In 154.7550
162.2 PLFMNWPXB505

Morton County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Morton County FireCounty Fire EMS Main3020675feT
Morton County- City of MandanFire Main3020175f9T
Morton County FireCounty Fire/EMS Operations3020775ffT
Morton County FireCounty Fire/EMS Operations302087600T
Morton County FireCounty Fire/EMS Operations302097601T
Morton County FireCounty Fire/EMS Operations302107602T
Morton County FireCounty Fire/EMS Operations302117603T
Morton County- City of MandanFire Operations3020275faT
Morton County- City of MandanFire Operations3020375fbT
Morton County- City of MandanFire Operations3020475fcT
Morton County- City of MandanFire Operations3020575fdT
Morton County- City of MandanMetro Ambulance Mandan EMS Operations8510213eT
1 encrypted talkgroup (cannot be monitored)
North Dakota Statewide Interoperable Radio Network (SIRN 20/20) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Morton County FireCounty Dive/Swift Water Rescue30107759bT Encrypted

Radio system sites in Morton County

Program the control channel first; your scanner finds the voice channels from it.

New Salem · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 33 (hex 21)
Control 852.2625
Voice 851.7625, 852.0375
Saint Anthony · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 50 (hex 32) · NAC A61
Control 852.2375, 852.4625
Voice 851.9625
Flasher · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 55 (hex 37) · NAC A66
Control 852.0875, 852.3125
Voice 851.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Morton County

Common questions

What frequency does the fire department use in Morton County?

Fire dispatch channels listed for Morton County: Morton County Fire 155.6250 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Morton County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 13 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Morton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Morton County?

For Morton County, start with the New Salem site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Morton County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Morton County are marked encrypted.

Are Morton County fire and EMS talkgroups encrypted?

1 of the 13 talkgroups listed for Morton County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.