Skip to content

McKenzie County Fire and EMS Frequencies

McKenzie County in North Dakota has 5 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About McKenzie County Fire and EMS Frequencies

Quick answer: Fire dispatch for McKenzie County: McKenzie County Fire 154.2200 MHz, P25, NAC 301. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example McKenzie County Fire talkgroup 27203 (hex 6a43).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For McKenzie County, start with the Peer Creek site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 853.7875 MHz.

Data updated .

McKenzie County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McKenzie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 301P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 300P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 299P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2200
In 159.2850
NAC 302P25WQUS401
McKenzie County FireMcKenzie County Fire – Dispatch154.2500
In 159.3450
FMNWQWW479

McKenzie County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
McKenzie County FireCounty Fire/EMS Main272036a43T
McKenzie County FireCounty Fire/EMS Operations272046a44T
McKenzie County FireCounty Fire/EMS Operations272056a45T
McKenzie County FireCounty Fire/EMS Operations272066a46T
McKenzie County FireCounty Fire/EMS Operations272076a47T
McKenzie County FireCounty Fire/EMS Operations272086a48T
McKenzie County EMSCounty EMS Operations273016aa5T
McKenzie County EMSCounty EMS Operations273026aa6T

Radio system sites in McKenzie County

Program the control channel first; your scanner finds the voice channels from it.

Peer Creek · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 34 (hex 22)
Control 853.7875
Voice 853.3375, 853.5625
Keene · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 48 (hex 30) · NAC A6F
Control 852.0625, 852.2875
Voice 851.7875
Watford City · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 51 (hex 33) · NAC A62
Control 852.1125, 852.3375
Voice 851.8375
Cartwright · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 84 (hex 54)
Control 852.1625, 852.3875
Voice 851.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McKenzie County

Common questions

What frequency does the fire department use in McKenzie County?

Fire dispatch channels listed for McKenzie County: McKenzie County Fire 154.2200 MHz, P25, NAC 301.

Do fire departments and EMS use a trunked radio system in McKenzie County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in McKenzie County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in McKenzie County?

For McKenzie County, start with the Peer Creek site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McKenzie County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for McKenzie County are marked encrypted.

Are McKenzie County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for McKenzie County are marked encrypted.