Skip to content

McHenry County Fire and EMS Frequencies

McHenry County in North Dakota has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 50 cities and communities below for local fire departments and EMS agencies.

About McHenry County Fire and EMS Frequencies

Quick answer: Fire dispatch for McHenry County: McHenry County Fire 154.1900 MHz, narrow FM, CSQ.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

McHenry County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McHenry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McHenry County FireVelva Fire154.1900CSQFMNKLC995

Fire Ground / Tactical

Fire Ground / Tactical frequencies for McHenry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McHenry County FireAnamoose Fire155.9400CSQFMNWNMG792

Radio system sites in McHenry County

Program the control channel first; your scanner finds the voice channels from it.

Towner · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 89 (hex 59)
Control 853.7875
Voice 853.3375, 853.5625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McHenry County

Common questions

What frequency does the fire department use in McHenry County?

Fire dispatch channels listed for McHenry County: McHenry County Fire 154.1900 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in McHenry County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in McHenry County?

For McHenry County, start with the Towner site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McHenry County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for McHenry County are marked encrypted.