Skip to content

Griggs County Fire and EMS Frequencies

Griggs County in North Dakota has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 24 cities and communities below for local fire departments and EMS agencies.

About Griggs County Fire and EMS Frequencies

Quick answer: EMS dispatch for Griggs County: Griggs County EMS 154.7850 MHz, narrow FM, 127.3 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Griggs County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Griggs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Griggs County EMSCooperstown EMS154.7850
In 158.8950
127.3 PLFMNWPKI812

Radio system sites in Griggs County

Program the control channel first; your scanner finds the voice channels from it.

Hannaford · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 22 (hex 16) · NAC A65
Control 853.6625, 853.8875
Voice 853.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Griggs County

Common questions

What frequency does EMS or the ambulance service use in Griggs County?

EMS dispatch channels listed for Griggs County: Griggs County EMS 154.7850 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Griggs County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Griggs County?

For Griggs County, start with the Hannaford site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.6625, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Griggs County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Griggs County are marked encrypted.