Skip to content

Cavalier County Fire and EMS Frequencies

Cavalier County in North Dakota has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 49 cities and communities below for local fire departments and EMS agencies.

About Cavalier County Fire and EMS Frequencies

Quick answer: EMS dispatch for Cavalier County: Cavalier County EMS 155.4075 MHz, narrow FM, no tone. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Cavalier County Fire talkgroup 10203 (hex 27db).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cavalier County, start with the Milton site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels: 851.8125, 852.3125 MHz.

Data updated .

Cavalier County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cavalier County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cavalier County FireHannah Fire Department154.3550FMNKNNI214

EMS Dispatch

EMS Dispatch frequencies for Cavalier County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cavalier County EMSMunich Ambulance155.4075
In 150.7900
FMNWQBD640

Cavalier County trunked talkgroups

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Cavalier County FireCavalier Fire/EMS Dispatch1020327dbT

Radio system sites in Cavalier County

Program the control channel first; your scanner finds the voice channels from it.

Milton · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 29 (hex 1D) · NAC A6C
Control 851.8125, 852.3125
Voice 851.5875
Wales · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 42 (hex 2A)
Control 853.8625
Voice 853.4125, 853.6375
Olga · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 73 (hex 49)
Control 853.7625
Voice 853.3125, 853.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cavalier County

Common questions

What frequency does EMS or the ambulance service use in Cavalier County?

EMS dispatch channels listed for Cavalier County: Cavalier County EMS 155.4075 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Cavalier County?

Yes. Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cavalier County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cavalier County?

For Cavalier County, start with the Milton site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 851.8125, 852.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cavalier County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Cavalier County are marked encrypted.

Are Cavalier County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Cavalier County are marked encrypted.