Skip to content

Bowman County Fire and EMS Frequencies

Bowman County in North Dakota has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 24 cities and communities below for local fire departments and EMS agencies.

About Bowman County Fire and EMS Frequencies

Quick answer: Fire dispatch for Bowman County: Bowman County Fire 155.9400 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Bowman County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bowman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bowman County FireBowman Fire155.9400FMNWPAX916

Radio system sites in Bowman County

Program the control channel first; your scanner finds the voice channels from it.

Rhame · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 77 (hex 4D) · NAC A63
Control 853.6125, 853.8375
Voice 853.3875
Bowman · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 0 · Site 224 (hex E0)
Voice 851.7875, 852.0625, 852.2875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bowman County

Common questions

What frequency does the fire department use in Bowman County?

Fire dispatch channels listed for Bowman County: Bowman County Fire 155.9400 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Bowman County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bowman County?

For Bowman County, start with the Rhame site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.6125, 853.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bowman County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Bowman County are marked encrypted.