Skip to content

Tyrrell County Fire and EMS Frequencies

Tyrrell County in North Carolina has 1 countywide conventional frequency and 2 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Tyrrell County Fire and EMS Frequencies

Quick answer: Fire dispatch for Tyrrell County: Tyrrell County Fire 154.1900 MHz, FM, 123.0 PL. Trunked: North Carolina VIPER, for example Tyrrell County Fire talkgroup 45002 (hex afca).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Tyrrell County, start with the Columbia site of North Carolina VIPER. Its control channels: 852.4375, 853.6125 MHz.

Data updated .

Tyrrell County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Tyrrell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyrrell County FireTyrell County Fire Dispatch154.1900
In 150.7900
123.0 PLFMWQBR920

Tyrrell County trunked talkgroups

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Tyrrell County FireTyrrell County Fire45002afcaD
Tyrrell County EMSTyrrell County EMS45001afc9D

Radio system sites in Tyrrell County

Program the control channel first; your scanner finds the voice channels from it.

Columbia · North Carolina VIPER
RFSS 3 · Site 14 (hex E) · NAC 1F0
Control 852.4375, 853.6125
Voice 851.1125, 851.4875, 851.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Tyrrell County

Common questions

What frequency does the fire department use in Tyrrell County?

Fire dispatch channels listed for Tyrrell County: Tyrrell County Fire 154.1900 MHz, FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Tyrrell County?

Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Tyrrell County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Tyrrell County?

For Tyrrell County, start with the Columbia site of North Carolina VIPER. Its control channels are 852.4375, 853.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Tyrrell County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Tyrrell County are marked encrypted.

Are Tyrrell County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Tyrrell County are marked encrypted.