Skip to content

Trinity Fire and EMS Frequencies

We do not have frequencies listed specifically for Trinity in Randolph County, North Carolina yet. Countywide channels for Randolph County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Thomasville ASR (Greensboro / Guilford County), about 5 miles away.

About Trinity Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Trinity: Randolph Fire Dispatch - Simulcast on VIPER 154.4150 MHz, FM, 151.4 PL. County-level ems dispatch that covers Trinity: Randolph County EMS 462.9500 MHz, FM, 155 DPL. Trunked: North Carolina VIPER, for example Randolph County Fire talkgroup 38509 (hex 966d).

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Trinity, start with the Thomasville ASR site of Greensboro / Guilford County, about 5 miles away. Its control channels: 856.9375, 857.9375, 858.9375 MHz.

Data updated .

Randolph County channels that also cover Trinity

Fire Dispatch

Fire Dispatch frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph Fire Dispatch - Simulcast on VIPERRandolph Fire Dispatch – Simulcast on VIPER154.4150151.4 PLFMKNJF413

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Asheboro Fireground/Admin FireAsheboro Fireground/Administration159.1050123.0 PLFMWPKV931
County Fireground 4County Fireground153.8900203.5 PLFMKIY367
County Fireground 5County Fireground154.1300151.4 PLFMKNJF413
County Fireground 6County Fireground154.1750151.4 PLFMKNJG413
County Fireground 7County Fireground153.8300151.4 PLFMKNJF413
County Fireground 8County Fireground155.0550151.4 PLFM—
County Fireground 9County Fireground154.2800FM—

Fire Talk-around

Fire Talk-around frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph Fire TalkRandolph Fire Talk (Channel 3) – Simulcast on VIPER155.8950
In 153.7400
151.4 PLFMWPPW449

EMS Dispatch

EMS Dispatch frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph County EMSRandolph County EMS – Dispatch462.9500
In 467.9500
155 DPLFMKA44373

EMS Tactical

EMS Tactical frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
MED 5 EMSMED 5 EMS463.1000265 DPLFM—

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Randolph County FireRandolph County Fire – Dispatch38509966dD
Randolph County FireJulian Fire Department Tactical385039667D
Randolph County FireRandolph County Fire – Fire Ground38508966cD
Randolph County FireFairgrove Fire Department Tactical (Old Alpha Tactical 1)385169674D
Randolph County FireAsh Rand Rescue Squad Tactical (Old Alpha Tactical 3)385189676D
Randolph County FireWestside Fire Department Tactical (Old Bravo Tactical 2)385219679D
Randolph County FireEast Side Fire Department Tactical (Old Delta Tactical 3)38524967cD
Randolph County FireGuilford – Randolph Fire Tactical3859696c4D
Randolph County EMSRandolph County EMS – Dispatch38506966aD
Randolph County EMSRandolph County EMS – Tactical Channel38507966bD

Nearest trunked radio sites

Distances are measured from the center of Trinity.

Thomasville ASR · Greensboro / Guilford County
RFSS 1 · Site 12 (hex C) · about 5 mi away
Control 856.9375, 857.9375, 858.9375, 859.9375
Voice 851.0375, 851.975, 852.3875, 853.1625, 853.9875, 856.0375
High Point Simulcast · High Point
RFSS 1 · Site 11 (hex B) · NAC 88B · about 6 mi away
Control 857.4375, 858.1375, 858.4375, 859.4375
Voice 854.5375, 855.4625, 855.7125, 856.4375, 856.7125, 857.7125, 858.7125, 859.7125
Riverdale Rd · North Carolina VIPER
RFSS 4 · Site 33 (hex 21) · NAC 1F0 · about 7 mi away
Control 853.875, 854.0625
Voice 851.075, 851.9875, 852.4125, 852.975, 853.2375, 856.1375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Trinity?

We do not have a fire dispatch channel listed specifically for Trinity. The county-level fire dispatch channels in the same county: Randolph Fire Dispatch - Simulcast on VIPER 154.4150 MHz, FM, 151.4 PL.

What frequency does EMS or the ambulance service use in Trinity?

We do not have a EMS dispatch channel listed specifically for Trinity. The county-level EMS dispatch channels in the same county: Randolph County EMS 462.9500 MHz, FM, 155 DPL.

Do fire departments and EMS use a trunked radio system in Trinity?

Yes. The county-level systems that cover Trinity are Fire and EMS talkgroups are listed for North Carolina VIPER: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Trinity?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Trinity?

For Trinity, start with the Thomasville ASR site of Greensboro / Guilford County. Its control channels are 856.9375, 857.9375, 858.9375, 859.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.