Skip to content

Spruce Pine Fire and EMS Frequencies

We do not have frequencies listed specifically for Spruce Pine in Mitchell County, North Carolina yet. Countywide channels for Mitchell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Woodys Knob (North Carolina VIPER), about 3 miles away.

About Spruce Pine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Spruce Pine: Mitchell County Fire 155.8050 MHz, FM, 97.4 PL. County-level ems dispatch that covers Spruce Pine: Mitchell County EMS 155.2800 MHz, FM, 97.4 PL. Trunked: North Carolina VIPER, for example Mitchell County Fire talkgroup 31002 (hex 791a).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Spruce Pine, start with the Woodys Knob site of North Carolina VIPER, about 3 miles away. Its control channels: 774.13125, 774.38125 MHz.

Data updated .

Mitchell County channels that also cover Spruce Pine

Fire Dispatch

Fire Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County FireMitchell County Fire – Dispatch (patched with VIPER)155.8050
In 153.7850
97.4 PLFMWYR658

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County FireMitchell Fire Tactical154.175097.4 PLFMWPBX586
Mitchell County FireMitchell Fire Tactical (may be patched with VIPER)154.2350
In 159.1200
100.0 PLFMWPBX586
Mitchell County FireMitchell Fire Tactical154.280097.4 PLFMWPBX586
Mitchell County FireMitchell Fire Tactical (may be patched with VIPER)154.3400
In 153.8300
100.0 PLFMWPBX586

EMS Dispatch

EMS Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County EMSMitchell County EMS – Dispatch (patched with VIPER)155.2800
In 155.2950
97.4 PLFMKWE557

EMS Tactical

EMS Tactical frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County EMSState Rescue155.280097.4 PLFMKWE557

Hospitals & Medical

Hospitals & Medical frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County HospitalSpruce Pine Hospital155.340097.4 PLFMKWE559

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Mitchell County FireMitchell County Fire – Dispatch31002791aD
Mitchell County FireMitchell County Fire – Dispatch310107922D
Mitchell County FireFire Alpha Tactical31005791dD
Mitchell County FireFire Bravo Tactical310147926D
Mitchell County FireCharlie Tactical310157927D
Mitchell County FireFire Delta Tactical310167928D
Mitchell County FireFire Echo Tactical310177929D
Mitchell County FireFire Foxtrot Tactical31018792aD
Mitchell County FireFire Golf Tactical31019792bD
Mitchell County FireFire Hotel Tactical31020792cD
Mitchell County EMSMitchell County EMS – Dispatch310017919D

Nearest trunked radio sites

Distances are measured from the center of Spruce Pine.

Woodys Knob · North Carolina VIPER
RFSS 2 · Site 91 (hex 5B) · NAC 1F0 · about 3 mi away
Control 774.13125, 774.38125
Voice 770.79375, 771.19375, 771.64375, 771.96875, 772.25625
Dobson Knob · North Carolina VIPER
RFSS 2 · Site 32 (hex 20) · NAC 1F0 · about 9 mi away
Control 859.0125, 859.8125
Voice 851.95, 852.275, 852.675, 853.25, 853.8625, 855.2875
Locust Knob · North Carolina VIPER
RFSS 2 · Site 57 (hex 39) · about 11 mi away
Control 852.7875, 853.75
Voice 851.3, 851.6625, 852.175
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Spruce Pine?

We do not have a fire dispatch channel listed specifically for Spruce Pine. The county-level fire dispatch channels in the same county: Mitchell County Fire 155.8050 MHz, FM, 97.4 PL.

What frequency does EMS or the ambulance service use in Spruce Pine?

We do not have a EMS dispatch channel listed specifically for Spruce Pine. The county-level EMS dispatch channels in the same county: Mitchell County EMS 155.2800 MHz, FM, 97.4 PL.

Do fire departments and EMS use a trunked radio system in Spruce Pine?

Yes. The county-level systems that cover Spruce Pine are Fire and EMS talkgroups are listed for North Carolina VIPER: 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Spruce Pine?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Spruce Pine?

For Spruce Pine, start with the Woodys Knob site of North Carolina VIPER. Its control channels are 774.13125, 774.38125 MHz. Program a control channel first; the scanner finds the voice channels from it.