About McDowell County Fire and EMS Frequencies
Quick answer: Fire dispatch for McDowell County: McDowell County Fire 155.0400 MHz, FM, 167.9 PL. EMS dispatch for McDowell County: McDowell County EMS 154.9350 MHz, FM, 203.5 PL. Trunked: North Carolina VIPER, for example McDowell County Fire talkgroup 28502 (hex 6f56).
- 16 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For McDowell County, start with the Dobson Knob site of North Carolina VIPER. Its control channels: 859.0125, 859.8125 MHz.
Data updated .
McDowell County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McDowell County Fire | McDowell County Fire – Dispatch | 155.0400 In 153.8750 | 167.9 PL | FM | KZV330 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crooked Creek Fire | Crooked Creek Fire | 154.1600 | 167.9 PL | FM | WPUW495 |
| McDowell County Fire | McDowell County Fire – Tactical Channel | 153.9500 | FMN | — | |
| McDowell County Fire | McDowell County Fire – Tactical Channel | 154.2200 | 141.3 PL | FM | WPTV370 |
| McDowell County Fire | McDowell County Fire – Tactical Channel | 154.3250 | 74.4 PL | FM | WPTV370 |
| McDowell County Fire | McDowell County Fire – Tactical Channel | 154.4000 | 110.9 PL | FM | WPTV370 |
| State Fire | State Fire | 154.2800 | CSQ | FM | WNYG498 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McDowell County Fire | McDowell County Fire – Tactical Channel | 155.2800 | 167.9 PL | FM | KNEX212 |
| McDowell County Fire | Ashford/North Cove Fire | 155.5800 In 151.3025 | FMN | WQOE675 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McDowell County EMS | McDowell County EMS – Dispatch | 154.9350 In 159.0000 | 203.5 PL | FM | KZV330 |
| McDowell County EMS | McDowell County EMS – Dispatch | 158.7750 In 153.8000 | 167.9 PL | FM | KZV330 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McDowell County EMS | McDowell County EMS – Tactical Channel | 155.1600 | 167.9 PL | FM | KUU510 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McDowell County Hospital | EMS to Hospital | 155.3400 | 167.9 PL | FM | KUP248 |
| McDowell County Hospital | EMS to Hospital | 155.4000 | 167.9 PL | FM | KUP248 |
| McDowell County Hospital | Hospital Med | 463.0500 In 468.0500 | 103.5 PL | FM | WNIY302 |
| McDowell County Hospital | Hospital Med | 463.1500 In 468.1500 | 103.5 PL | FM | WNIY302 |
McDowell County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| McDowell County Fire | McDowell County Fire | 28502 | 6f56 | D |
| McDowell County Fire | Dysartsville Fire Tactical | 28520 | 6f68 | D |
| McDowell County Fire | Ashford-North Cove Fire Tactical | 28524 | 6f6c | D |
| McDowell County Fire | Sugar Hill Fire Tactical | 28525 | 6f6d | D |
| McDowell County Fire | Woodlawn Fire Tactical | 28529 | 6f71 | D |
| McDowell County EMS | McDowell County EMS | 28501 | 6f55 | D |
| McDowell County EMS | McDowell County Rescue Dispatch | 28526 | 6f6e | D |
Radio system sites in McDowell County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in McDowell County
Common questions
What frequency does the fire department use in McDowell County?
Fire dispatch channels listed for McDowell County: McDowell County Fire 155.0400 MHz, FM, 167.9 PL.
What frequency does EMS or the ambulance service use in McDowell County?
EMS dispatch channels listed for McDowell County: McDowell County EMS 154.9350 MHz, FM, 203.5 PL.
Do fire departments and EMS use a trunked radio system in McDowell County?
Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in McDowell County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in McDowell County?
For McDowell County, start with the Dobson Knob site of North Carolina VIPER. Its control channels are 859.0125, 859.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are McDowell County fire and EMS frequencies encrypted?
None of the 16 conventional frequencies listed for McDowell County are marked encrypted.
Are McDowell County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for McDowell County are marked encrypted.