About Hyde County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hyde County: Hyde County Fire 154.1450 MHz, FM, 025 DPL. EMS dispatch for Hyde County: Hyde County EMS 154.3850 MHz, FM, 107.2 PL. Trunked: North Carolina VIPER, for example Hyde County Fire talkgroup 24503 (hex 5fb7).
- 15 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hyde County, start with the Engelhard site of North Carolina VIPER. Its control channels: 853.975 MHz.
Data updated .
Hyde County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hyde County Fire | Hyde County Fire East Dispatch | 154.1450 In 150.7750 | 025 DPL | FM | WPQZ386 |
| Hyde County Fire | Hyde County Fire West Dispatch | 154.8150 In 156.0000 | 025 DPL | FM | WPQZ386 |
| Hyde County Fire | Countywide Fire/EMS Dispatch | 155.5725 | FMN | WPQZ386 | |
| Hyde County Fire | Ocracoke Fire Dispatch | 155.8050 In 153.7850 | 225.7 PL | FM | WQCK822 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hyde County Fire | Ocracoke Fire Department Tactical | 150.7750 | 107.2 PL | FM | WPQZ386 |
| Hyde County Fire | Fairfield Fire Department Tactical | 153.7850 | 210.7 PL | FM | WQCK822 |
| Hyde County Fire | Ponzer Fire Department Tactical | 154.7400 | 210.7 PL | FM | WQCK822 |
| Hyde County Fire | Englehard Fire Department Tactical | 154.9500 | 107.2 PL | FM | WQCK822 |
| Hyde County Fire | Scranton Fire Department Tactical | 154.9500 | 210.7 PL | FM | WQCK822 |
| Hyde County Fire | Swan Quarter Fire Department Tactical | 155.8350 | 210.7 PL | FM | WQCK822 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hyde County EMS | Ocracoke EMS Dispatch | 154.3850 In 155.1300 | 107.2 PL | FM | WQCK822 |
| Hyde County EMS | Hyde County EMS Dispatch | 154.8600 In 155.4300 | 210.7 PL | FM | WQCK822 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hyde County EMS | State Rescue | 155.2800 | 110.9 PL | FM | KZC636 |
| Hyde County EMS | Hyde County EMS – Tactical Channel | 155.4000 | 110.9 PL | FM | KZC636 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hyde County EMS | Hyde Co. EMS to Hospital | 153.9350 In 158.8800 | 151.4 PL | FM | WPEP703 |
Hyde County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hyde County Fire | Hyde County Fire | 24503 | 5fb7 | D |
| Hyde County EMS | Hyde County EMS | 24502 | 5fb6 | D |
| Hyde County EMS | Hyde EMS Administration | 24513 | 5fc1 | D |
Radio system sites in Hyde County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hyde County
Common questions
What frequency does the fire department use in Hyde County?
Fire dispatch channels listed for Hyde County: Hyde County Fire 154.1450 MHz, FM, 025 DPL.
What frequency does EMS or the ambulance service use in Hyde County?
EMS dispatch channels listed for Hyde County: Hyde County EMS 154.3850 MHz, FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Hyde County?
Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hyde County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hyde County?
For Hyde County, start with the Engelhard site of North Carolina VIPER. Its control channels are 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hyde County fire and EMS frequencies encrypted?
None of the 15 conventional frequencies listed for Hyde County are marked encrypted.
Are Hyde County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Hyde County are marked encrypted.