Skip to content

Greene County Fire and EMS Frequencies

Greene County in North Carolina has 8 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Greene County Fire and EMS Frequencies

Quick answer: Fire dispatch for Greene County: Greene County Fire 39.9000 MHz, FM, 88.5 PL. Trunked: North Carolina VIPER, for example Greene County Fire talkgroup 20503 (hex 5017).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Greene County, start with the Arba site of North Carolina VIPER. Its control channels: 853.25, 853.575 MHz.

Data updated .

Greene County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County FireGreene County Fire/ Ems39.900088.5 PLFMKGL481
Greene County FireGreene County Fire/ Ems39.980088.5 PLFMKGL481

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County FireWalstonburg FIre Tactical154.4375
In 153.8375
88.5 PLFMWPMB785
Greene County FireGreene Operations769.0063NAC 740P25—
Greene County FireGreene Operations769.0188NAC 740P25—
Greene County FireGreene Operations769.0313NAC 740P25—

EMS Tactical

EMS Tactical frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County EMSGreene County Ems Operations155.280088.5 PLFMKNFV440

Hospitals & Medical

Hospitals & Medical frequencies for Greene County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County HospitalGreene County Ems to Hospital155.340088.5 PLFMKNFV440

Greene County trunked talkgroups

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Greene County FireGreene County Fire – Dispatch205035017D
Greene County FireFire Operations205025016D
Greene County FireFire Operations20510501eD
Greene County FireFire Operations20511501fD
Greene County FireFire Operations205125020D

Radio system sites in Greene County

Program the control channel first; your scanner finds the voice channels from it.

Arba · North Carolina VIPER
RFSS 3 · Site 2 (hex 2) · NAC 1F2
Control 853.25, 853.575
Voice 851.9875, 856.0375, 857.0375, 858.0375
Farmville · North Carolina VIPER
RFSS 3 · Site 23 (hex 17)
Control 853.1, 853.6125
Voice 851.05, 851.575, 851.8375, 852.1, 852.6
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Greene County

Common questions

What frequency does the fire department use in Greene County?

Fire dispatch channels listed for Greene County: Greene County Fire 39.9000 MHz, FM, 88.5 PL.

Do fire departments and EMS use a trunked radio system in Greene County?

Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Greene County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Greene County?

For Greene County, start with the Arba site of North Carolina VIPER. Its control channels are 853.25, 853.575 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Greene County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Greene County are marked encrypted.

Are Greene County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Greene County are marked encrypted.