Skip to content

Gates County Fire and EMS Frequencies

Gates County in North Carolina has 3 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Gates County Fire and EMS Frequencies

Quick answer: Fire dispatch for Gates County: Gates County Fire 154.1000 MHz, narrow FM, 118.8 PL. Trunked: North Carolina VIPER, for example Gates County Fire talkgroup 19003 (hex 4a3b).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gates County, start with the Gatesville DOC site of North Carolina VIPER. Its control channels: 852.4, 853.45 MHz.

Data updated .

Gates County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Gates County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gates County FireFire/EMS Dispatch
Patched to VIPER
154.1000
In 155.8950
118.8 PLFMNWRB375

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gates County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gates County FireGates County Fire – Tactical Channel155.1150118.8 PLFMNWPQD494
Gates County FireGates County Fire – Tactical Channel155.1900FMNKFD598

Gates County trunked talkgroups

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Gates County FireGates County Fire – Dispatch190034a3bD
Gates County EMSGates County EMS – Dispatch190024a3aD

Radio system sites in Gates County

Program the control channel first; your scanner finds the voice channels from it.

Gatesville DOC · North Carolina VIPER
RFSS 3 · Site 26 (hex 1A) · NAC 1F0
Control 852.4, 853.45
Voice 851.1875, 851.55, 852.1
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Gates County

Common questions

What frequency does the fire department use in Gates County?

Fire dispatch channels listed for Gates County: Gates County Fire 154.1000 MHz, narrow FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Gates County?

Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Gates County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Gates County?

For Gates County, start with the Gatesville DOC site of North Carolina VIPER. Its control channels are 852.4, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gates County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Gates County are marked encrypted.

Are Gates County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Gates County are marked encrypted.