About Edgecombe County Fire and EMS Frequencies
Quick answer: Fire dispatch for Edgecombe County: Edgecombe County Fire 154.1600 MHz, narrow FM, 131.8 PL. EMS dispatch for Edgecombe County: Edgecombe County EMS 156.2400 MHz, narrow FM, 131.8 PL. Trunked: North Carolina VIPER, for example Edgecombe County Fire talkgroup 17002 (hex 426a).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Edgecombe County, start with the Dodge City site of North Carolina VIPER. Its control channels: 852.1125, 853.975 MHz.
Data updated .
Edgecombe County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Edgecombe County Fire | Edgecombe County Fire Dispatch (Simulcast on VIPER) | 154.1600 | 131.8 PL | FMN | KIZ486 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Edgecombe County Fire | Heartsease Volunteer Fire Department | 154.1600 | 131.8 PL | FMN | WQWL395 |
| Edgecombe County Fire | West Edgecombe Volunteer Fire Department | 154.2650 | 131.8 PL | FMN | — |
| Edgecombe County Fire | Edgecombe County State Fire | 154.2800 | 131.8 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Edgecombe County EMS | Edgecombe County EMS (Simulcast on VIPER) | 156.2400 In 150.7750 | 131.8 PL | FMN | KNDB790 |
Edgecombe County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Edgecombe County Fire | Edgecombe County Fire – Dispatch | 17002 | 426a | D |
| Edgecombe County EMS | Edgecombe County EMS – Dispatch | 17001 | 4269 | D |
Radio system sites in Edgecombe County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Edgecombe County
Common questions
What frequency does the fire department use in Edgecombe County?
Fire dispatch channels listed for Edgecombe County: Edgecombe County Fire 154.1600 MHz, narrow FM, 131.8 PL.
What frequency does EMS or the ambulance service use in Edgecombe County?
EMS dispatch channels listed for Edgecombe County: Edgecombe County EMS 156.2400 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Edgecombe County?
Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Edgecombe County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Edgecombe County?
For Edgecombe County, start with the Dodge City site of North Carolina VIPER. Its control channels are 852.1125, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Edgecombe County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Edgecombe County are marked encrypted.
Are Edgecombe County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Edgecombe County are marked encrypted.