Skip to content

Durham County Fire and EMS Frequencies

Durham County in North Carolina has 4 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Durham County Fire and EMS Frequencies

Quick answer: Fire dispatch for Durham County: Durham County Fire 154.1300 MHz, narrow FM, 156.7 PL. Trunked: North Carolina VIPER, for example Durham County Fire talkgroup 16538 (hex 409a).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Durham County, start with the Duke University site of North Carolina VIPER. Its control channels: 857.8625, 858.8375 MHz.

Data updated .

Durham County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Durham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Durham County FireCounty Fire Dispatch
Patched to Durham City TRS
154.1300156.7 PLFMNWPRX249

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Durham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Durham County FireDigital Vehicle Repeater System770.9625
In 800.9625
156.7 PLFMN—

Hospitals & Medical

Hospitals & Medical frequencies for Durham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Durham VA Medical CenterMaintenance408.2375NAC 352P25—
Durham VA Medical CenterPatient Movement410.3250NAC 352P25—

Durham County trunked talkgroups

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Durham County FireFire Depts16538409aD
Durham County EMSDurham County EMS – Tactical Channel165374099D

Radio system sites in Durham County

Program the control channel first; your scanner finds the voice channels from it.

Duke University · North Carolina VIPER
RFSS 1 · Site 7 (hex 7) · NAC 1F0
Control 857.8625, 858.8375
Voice 852.45, 853.5125, 854.8375, 855.2875, 855.5875, 856.8375
Camden Ave · North Carolina VIPER
RFSS 1 · Site 9 (hex 9) · NAC 1F2
Control 855.1125, 858.8125
Voice 851.6, 852.075, 852.4125, 852.9125, 853.5875, 853.875
Cole Mill Rd · North Carolina VIPER
RFSS 1 · Site 15 (hex F) · NAC 1F4
Control 857.0875, 859.5125
Voice 851.275, 851.9875, 852.275, 852.775, 853.45, 853.775
RTP Bryan Ctr · North Carolina VIPER
RFSS 1 · Site 47 (hex 2F) · NAC 1F0
Control 774.03125, 774.28125
Voice 770.93125, 771.13125, 771.68125, 772.38125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Durham County

Common questions

What frequency does the fire department use in Durham County?

Fire dispatch channels listed for Durham County: Durham County Fire 154.1300 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Durham County?

Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Durham County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Durham County?

For Durham County, start with the Duke University site of North Carolina VIPER. Its control channels are 857.8625, 858.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Durham County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Durham County are marked encrypted.

Are Durham County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Durham County are marked encrypted.