About Anson County Fire and EMS Frequencies
Quick answer: Fire dispatch for Anson County: Anson Co. FD Dispatch 154.1450 MHz, FM, 141.3 PL. EMS dispatch for Anson County: Anson Co. EMS Dispatch 158.8500 MHz, FM, 051 DPL; Anson County EMS 155.2800 MHz, FM, 141.3 PL. Trunked: North Carolina VIPER, for example Anson County Fire talkgroup 4508 (hex 119c).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Anson County, start with the Anson WT site of North Carolina VIPER. Its control channels: 772.86875, 774.14375 MHz.
Data updated .
Anson County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anson Co. FD Dispatch | Anson Co. Fire Department Dispatch | 154.1450 | 141.3 PL | FM | WPFY438 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lanesboro FD Tac Fire | Lanesboro Fire Department Tactical | 155.2650 | 141.3 PL | FM | WPPA690 |
| Paechland FD Tac Fire | Paechland Fire Department Tactical | 154.2950 | 141.3 PL | FM | WPHK429 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anson Co. EMS Dispatch | Anson Co. EMS Dispatch | 158.8500 | 051 DPL | FM | — |
| Anson County EMS | EMS/Rescue Dispatch | 155.2800 | 141.3 PL | FM | KNCS880 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anson County Hospital | Hospital | 155.3400 | 141.3 PL | FM | KAN542 |
Anson County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Anson County Fire | Anson County Fire | 4508 | 119c | D |
| Anson County EMS | Anson County EMS | 4503 | 1197 | D |
Radio system sites in Anson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Anson County
Common questions
What frequency does the fire department use in Anson County?
Fire dispatch channels listed for Anson County: Anson Co. FD Dispatch 154.1450 MHz, FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Anson County?
EMS dispatch channels listed for Anson County: Anson Co. EMS Dispatch 158.8500 MHz, FM, 051 DPL; Anson County EMS 155.2800 MHz, FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Anson County?
Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Anson County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Anson County?
For Anson County, start with the Anson WT site of North Carolina VIPER. Its control channels are 772.86875, 774.14375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Anson County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Anson County are marked encrypted.
Are Anson County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Anson County are marked encrypted.