About Romulus Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Romulus: Seneca County Fire 460.1000 MHz, narrow FM, 114.8 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Romulus conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Romulus Fire | Romulus Fire – Fire Ground | 458.5500 | 173.8 PL | FMN | WPPE826 |
Seneca County channels that also cover Romulus
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seneca County Fire | Fire/EMS Dispatch | 460.1000 In 465.1000 | 114.8 PL | FMN | WQVK598 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire 3 - Fireground | Fire 3 – Fireground – Fire Ground | 453.3875 | 173.8 PL | FMN | WQVL544 |
| Fire 4 - Fireground | Fire 4 – Fireground – Fire Ground | 453.6625 | 173.8 PL | FMN | KNIS940 |
| Fire 5 - Fireground/Landing Zone | Fire 5 – Fireground/Landing Zone – Fire Ground /Landing Zone | 453.9625 | 173.8 PL | FMN | WQVL544 |
| Seneca County Fire | Seneca County Fire – South Command | 453.6000 In 458.6000 | 173.8 PL | FMN | WQVK598 |
| Seneca County Fire | Seneca County Fire – North Command | 453.6500 In 458.6500 | 173.8 PL | FMN | WQVK598 |
| Seneca County Fire | Seneca County Fire – FAST/RIT | 460.5625 | 173.8 PL | FMN | WPMM240 |
| Seneca County Fire | Seneca County Fire – HazMat | 465.5625 | 173.8 PL | FMN | WQVL544 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire 6 - Fire Police | Fire 6 – Fire Police – Fire Police | 465.6000 | 173.8 PL | FMN | WPMW785 |
Nearest trunked radio sites
Distances are measured from the center of Romulus.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Romulus?
We do not have a fire dispatch channel listed specifically for Romulus. The county-level fire dispatch channels in the same county: Seneca County Fire 460.1000 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Romulus?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Romulus?
For Romulus, start with the Ontario North Simulcast site of Monroe/Ontario Counties. Its control channels are 769.28125, 769.55625, 769.85625, 770.10625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Romulus fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Romulus are marked encrypted.