Skip to content

Genesee County Fire and EMS Frequencies

Genesee County in New York has 2 countywide conventional frequencies and 15 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Genesee County Fire and EMS Frequencies

Quick answer: Fire dispatch for Genesee County: Genesee County Fire 154.8750 MHz, narrow FM, CSQ. Trunked: Genesee/Orleans Counties, for example Genesee County Fire/EMS talkgroup 10029 (hex 272d).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Genesee/Orleans Counties: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Genesee County, start with the Genesee County Simulcast site of Genesee/Orleans Counties. Its control channels: 851.2875, 851.4625, 851.9125 MHz.

Data updated .

Genesee County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Genesee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Genesee County FireGenesee County Fire – Dispatch154.8750CSQFMNWQTH583

Fire Talk-around

Fire Talk-around frequencies for Genesee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Genesee County FireFire Department On Scene Talk Around866.0125156.7 PLFM—

Genesee County trunked talkgroups

Genesee/Orleans Counties

System ID 229

Genesee/Orleans Counties talkgroups
AgencyDescriptionTalkgroupHexMode
Genesee County Fire/EMSFire/EMS Dispatch10029272dT
Genesee County Fire/EMSFire Command10031272fT
Genesee County Fire/EMSWest Operations100352733T
Genesee County Fire/EMSEast Operations100372735T
Genesee County Fire/EMSEast Operations100652751T
Genesee County Fire/EMSEmergency Revert10125278dT
Genesee County Fire/EMSFire Water Supply101372799T
Genesee County Fire/EMSWest Battalion1015727adT
Genesee County Fire/EMSEast Operations1015927afT
Genesee County Fire/EMSEast Battalion1016127b1T
Genesee County Fire/EMSWest Operations1016327b3T
Genesee County Fire/EMSWest Operations1016527b5T
Genesee County Fire/EMSFire Police10107277bT
Genesee County Fire/EMSEMS Battalion100332731T
Genesee County Fire/EMSEMS to Hospital10123278bT

Radio system sites in Genesee County

Program the control channel first; your scanner finds the voice channels from it.

Genesee County Simulcast · Genesee/Orleans Counties
RFSS 10 · Site 10 (hex A) · NAC 469
Control 851.2875, 851.4625, 851.9125, 852.3625, 852.8125, 853.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Genesee County

Common questions

What frequency does the fire department use in Genesee County?

Fire dispatch channels listed for Genesee County: Genesee County Fire 154.8750 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Genesee County?

Yes. Fire and EMS talkgroups are listed for Genesee/Orleans Counties: 15 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Genesee County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Genesee County?

For Genesee County, start with the Genesee County Simulcast site of Genesee/Orleans Counties. Its control channels are 851.2875, 851.4625, 851.9125, 852.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Genesee County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Genesee County are marked encrypted.

Are Genesee County fire and EMS talkgroups encrypted?

None of the 15 talkgroups listed for Genesee County are marked encrypted.