About Johnstown Fire and EMS Frequencies
Quick answer: Fire dispatch for Johnstown: Johnstown Fire 155.1225 MHz, narrow FM, 192.8 PL.
- 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Johnstown conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Johnstown Fire | Johnstown Fire – Dispatch | 155.1225 In 153.7550 | 192.8 PL | FMN | WQTV859 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Johnstown Fire | Johnstown Fire – Fire Ground | 154.1450 | 146.2 PL | FMN | KFT247 |
Fulton County channels that also cover Johnstown
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County Fire | Fire Paging | 154.0625 | 94.8 PL | FMN | WRDM288 |
| Fulton County Fire | Fire Response | 154.2650 In 150.8050 | 141.3 PL | FMN | KFT247 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County Fire | Fulton County Fire – Fire Ground | 153.7775 | 123.0 PL | FMN | KFT247 |
| Fulton County Fire | Fulton County Fire – Fire Ground | 153.9500 | 131.8 PL | FMN | KFT247 |
| Fulton County Fire | Fulton County Fire – Fire Ground | 154.0775 | 123.0 PL | FMN | KFT247 |
| Fulton County Fire | Fire Operations | 154.8525 In 158.9325 | 162.2 PL | FMN | WRAM483 |
| Fulton County Fire | Landing Zone Operations | 155.3250 | 131.8 PL | FMN | WPEK556 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County Fire | Fire Police | 155.3850 | 131.8 PL | FMN | WPEK556 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ch. 2 EMS | Channel 2 EMS | 155.1750 | 131.8 PL | FMN | KNJE210 |
| Fulton County EMS | EMS Dispatch & Operations | 155.2050 In 153.9950 | 131.8 PL | FMN | KNJE210 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County EMS | EMS F1 North Repeater Input | 158.8050 | 114.8 PL | FMN | KGT629 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fulton County Hospital | Channel 3 Hospital | 155.3400 | 131.8 PL | FMN | KNJE210 |
Nearest trunked radio sites
Distances are measured from the center of Johnstown.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Johnstown?
Fire dispatch channels listed for Johnstown: Johnstown Fire 155.1225 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in Johnstown?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Johnstown?
For Johnstown, start with the Schenectady County Simulcast site of Albany/Schenectady Counties. Its control channels are 851.2875, 851.85, 852.075 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Johnstown fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Johnstown are marked encrypted.