Skip to content

Sierra County Fire and EMS Frequencies

Sierra County in New Mexico has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Sierra County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sierra County: Sierra County Fire 154.2500 MHz, narrow FM, 156.7 PL. EMS dispatch for Sierra County: Sierra County EMS 151.1825 MHz, narrow FM, 156.7 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sierra County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sierra County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sierra County FireFire/EMS Dispatch154.2500
In 153.7700
156.7 PLFMNWNMR855

EMS Dispatch

EMS Dispatch frequencies for Sierra County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sierra County EMSSierra County EMS151.1825156.7 PLFMNWQTD933

Radio system sites in Sierra County

Program the control channel first; your scanner finds the voice channels from it.

Caballo Peak · New Mexico DTRS
RFSS 3 · Site 9 (hex 9) · NAC 850
Control 769.19375, 769.44375, 769.71875, 769.96875
Voice 770.21875, 770.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sierra County

Common questions

What frequency does the fire department use in Sierra County?

Fire dispatch channels listed for Sierra County: Sierra County Fire 154.2500 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Sierra County?

EMS dispatch channels listed for Sierra County: Sierra County EMS 151.1825 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Sierra County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sierra County?

For Sierra County, start with the Caballo Peak site of New Mexico DTRS. Its control channels are 769.19375, 769.44375, 769.71875, 769.96875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sierra County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Sierra County are marked encrypted.