About Roosevelt County Fire and EMS Frequencies
Quick answer: Fire dispatch for Roosevelt County: Milnesand Fire 154.9950 MHz, narrow FM, no tone; Roosevelt County Fire 154.3850 MHz, narrow FM, 100.0 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Roosevelt County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Milnesand Fire | Milnesand Fire – Dispatch | 154.9950 | FMN | KNBV919 | |
| Roosevelt County Fire | Roosevelt County Fire – Dispatch (tone varies by site) | 154.3850 In 156.0000 | 100.0 PL | FMN | WQEY869 |
Radio system sites in Roosevelt County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Roosevelt County
Common questions
What frequency does the fire department use in Roosevelt County?
Fire dispatch channels listed for Roosevelt County: Milnesand Fire 154.9950 MHz, narrow FM, no tone; Roosevelt County Fire 154.3850 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Roosevelt County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Roosevelt County?
For Roosevelt County, start with the Midway site of New Mexico DTRS. Its control channels are 769.19375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Roosevelt County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Roosevelt County are marked encrypted.