Skip to content

Quay County Fire and EMS Frequencies

Quay County in New Mexico has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Quay County Fire and EMS Frequencies

Quick answer: Fire dispatch for Quay County: Quay County Fire 153.7700 MHz, narrow FM, 107.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Quay County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Quay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Quay County FireQuay County Fire – Dispatch153.7700107.2 PLFMNWQRR365
Quay County FireRosebud Fire Department154.3250
In 153.7700
141.3 PLFMNWPKL411

Radio system sites in Quay County

Program the control channel first; your scanner finds the voice channels from it.

Wheatland · New Mexico DTRS
RFSS 1 · Site 61 (hex 3D) · NAC 850
Control 769.94375, 770.20625, 770.95625
Palomis Mesa · New Mexico DTRS
RFSS 1 · Site 72 (hex 48) · NAC 850
Control 769.16875, 769.41875, 769.66875
Voice 769.91875
Tucumcari Mtn · New Mexico DTRS
RFSS 1 · Site 82 (hex 52) · NAC 852
Control 769.65625, 770.94375, 774.33125
Voice 774.79675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Quay County

Common questions

What frequency does the fire department use in Quay County?

Fire dispatch channels listed for Quay County: Quay County Fire 153.7700 MHz, narrow FM, 107.2 PL.

What scanner do I need to listen to fire and EMS in Quay County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Quay County?

For Quay County, start with the Wheatland site of New Mexico DTRS. Its control channels are 769.94375, 770.20625, 770.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Quay County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Quay County are marked encrypted.