Skip to content

Otero County Fire and EMS Frequencies

Otero County in New Mexico has 7 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 17 cities and communities below for local fire departments and EMS agencies.

About Otero County Fire and EMS Frequencies

Quick answer: Fire dispatch for Otero County: Otero County Fire 154.2050 MHz, narrow FM, 114.8 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Otero County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Otero County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Otero County FireOtero County Fire – Dispatch154.2050
In 150.7900
114.8 PLFMNWPLX405

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Otero County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Otero County FireOtero County Fire – Tactical Channel154.0475FMNWQUF612
Otero County FireOtero County Fire – Tactical Channel154.1450114.8 PLFMNWPLX405
Otero County FireOtero County Fire – Tactical Channel154.2500114.8 PLFMNWPLX405
Otero County FireOtero County Fire – Tactical Channel154.2650114.8 PLFMNWPLX405
Otero County FireOtero County Fire – Tactical Channel155.7225FMNWQUF612
Otero County FireOtero County Fire – Tactical Channel158.7675FMNWQUF612

Radio system sites in Otero County

Program the control channel first; your scanner finds the voice channels from it.

Alamogordo · New Mexico DTRS
RFSS 3 · Site 28 (hex 1C) · NAC 858
Control 769.90625, 770.46875, 774.56875
Voice 774.81875
Benson Ridge · New Mexico DTRS
RFSS 3 · Site 29 (hex 1D) · NAC 859
Control 770.18125, 770.45625, 774.58125
Voice 774.83125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Otero County

Common questions

What frequency does the fire department use in Otero County?

Fire dispatch channels listed for Otero County: Otero County Fire 154.2050 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Otero County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Otero County?

For Otero County, start with the Alamogordo site of New Mexico DTRS. Its control channels are 769.90625, 770.46875, 774.56875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Otero County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Otero County are marked encrypted.