Skip to content

Colfax County Fire and EMS Frequencies

Colfax County in New Mexico has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Colfax County Fire and EMS Frequencies

Quick answer: Fire dispatch for Colfax County: Colfax County Fire 154.4000 MHz, FM, 136.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Colfax County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Colfax County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Colfax County FireColfax County Fire & EMS154.4000
In 153.8900
136.5 PLFMWRYB314

Radio system sites in Colfax County

Program the control channel first; your scanner finds the voice channels from it.

Miami Mesa · New Mexico DTRS
RFSS 1 · Site 68 (hex 44) · NAC 858
Control 769.19375, 769.44375, 769.71875
Raton · New Mexico DTRS
RFSS 1 · Site 75 (hex 4B) · NAC 855
Control 769.90625, 770.46875, 774.56875
Touch Me Not · New Mexico DTRS
RFSS 1 · Site 81 (hex 51) · NAC 850
Control 769.16875, 769.41875, 769.66875
Voice 769.91875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Colfax County

Common questions

What frequency does the fire department use in Colfax County?

Fire dispatch channels listed for Colfax County: Colfax County Fire 154.4000 MHz, FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Colfax County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Colfax County?

For Colfax County, start with the Miami Mesa site of New Mexico DTRS. Its control channels are 769.19375, 769.44375, 769.71875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Colfax County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Colfax County are marked encrypted.