About Bernalillo County Fire and EMS Frequencies
Quick answer: Trunked: New Mexico DTRS, for example Bernalillo County Fire & Rescue talkgroup 14610 (hex 3912).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: New Mexico DTRS: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bernalillo County, start with the Sandia Crest (ABQ Metro) site of New Mexico DTRS. Its control channels: 769.16875, 769.40625, 769.41875 MHz.
Data updated .
Bernalillo County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Isleta Pueblo Fire | Isleta Pueblo Fire – Tactical Channel (also used by Police) | 151.5950 | 151.4 PL | FM | — |
Bernalillo County trunked talkgroups
New Mexico DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bernalillo County Fire & Rescue | Fire Control Dispatch | 14610 | 3912 | T |
| Bernalillo County Fire & Rescue | South Tactical | 14611 | 3913 | T |
| Bernalillo County Fire & Rescue | South Tactical | 14612 | 3914 | T |
| Bernalillo County Fire & Rescue | North Tactical | 14613 | 3915 | T |
| Bernalillo County Fire & Rescue | North Tactical | 14614 | 3916 | T |
| Bernalillo County Fire & Rescue | East Tactical | 14615 | 3917 | T |
| Bernalillo County Fire & Rescue | East Tactical | 14616 | 3918 | T |
| Bernalillo County Fire & Rescue | West Tactical | 14617 | 3919 | T |
| Bernalillo County Fire & Rescue | West Tactical | 14618 | 391a | T |
| Bernalillo County Fire & Rescue | Metro Air Service Unit | 14632 | 3928 | T |
| Bernalillo County Fire & Rescue | Staging | 14637 | 392d | T |
| Bernalillo County Fire & Rescue | Training | 14619 | 391b | T |
| Bernalillo County Fire & Rescue | Training | 14620 | 391c | T |
Radio system sites in Bernalillo County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Bernalillo County
Common questions
Do fire departments and EMS use a trunked radio system in Bernalillo County?
Yes. Fire and EMS talkgroups are listed for New Mexico DTRS: 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bernalillo County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bernalillo County?
For Bernalillo County, start with the Sandia Crest (ABQ Metro) site of New Mexico DTRS. Its control channels are 769.16875, 769.40625, 769.41875, 769.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bernalillo County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Bernalillo County are marked encrypted.
Are Bernalillo County fire and EMS talkgroups encrypted?
None of the 13 talkgroups listed for Bernalillo County are marked encrypted.