Skip to content

White Pine County Fire and EMS Frequencies

White Pine County in Nevada has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About White Pine County Fire and EMS Frequencies

Quick answer: Fire dispatch for White Pine County: White Pine Co Fire Dispatch 159.1800 MHz, narrow FM, 100.0 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

White Pine County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for White Pine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White Pine Co Fire DispatchWhite Pine Co Fire Dispatch (Ely)159.1800
In 153.9650
100.0 PLFMNWQJS224
White Pine Co Fire DispatchWhite Pine Co Fire Dispatch (additional sites, multiple PL tones)159.1800
In 153.9650
FMNWQJS224

Fire Ground / Tactical

Fire Ground / Tactical frequencies for White Pine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White Pine Co Fire Tac 1White Pine Co Fire Tactical154.1600FMWQJS224
White Pine Co Fire Tac 2White Pine Co Fire Tactical154.3550FMWQJS224

Radio system sites in White Pine County

Program the control channel first; your scanner finds the voice channels from it.

Buster Mountain (US-50) · Nevada Shared Radio System (EDACS)
Site 102 (hex 66)
Control 852.15
Voice 851.45, 852.6375, 853.25, 853.85
Buster Mountain (US-50 W of Ely) · Nevada Shared Radio System (P25)
Project 25 · RFSS 151 · Site 151 (hex 97) · NAC 097
Control 855.7125
Voice 851.45, 852.15, 852.6375, 853.25, 853.85, 855.2125
Kimberly Mountain (WNW of Ely) · Nevada Shared Radio System (P25)
Project 25 · RFSS 153 · Site 153 (hex 99) · NAC 099
Control 857.4875
Voice 856.4375, 856.7375, 857.0125, 859.7625
Border Inn (US-50 at NV-UT border) · Nevada Shared Radio System (P25)
Project 25 · RFSS 161 · Site 161 (hex A1) · NAC 0A1
Control 858.4875
Voice 856.2625, 856.4625, 857.2625, 858.2625, 859.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in White Pine County

Common questions

What frequency does the fire department use in White Pine County?

Fire dispatch channels listed for White Pine County: White Pine Co Fire Dispatch 159.1800 MHz, narrow FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in White Pine County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in White Pine County?

For White Pine County, start with the Buster Mountain (US-50) site of Nevada Shared Radio System (EDACS). Its control channels are 852.15 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are White Pine County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for White Pine County are marked encrypted.