About Mineral County Fire and EMS Frequencies
Quick answer: Fire dispatch for Mineral County: Mineral County Fire 154.4150 MHz, FM, 203.5 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Mineral County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mineral County Fire | Mineral County Fire – Dispatch | 154.4150 | 203.5 PL | FM | WPZT354 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mineral County Fire | Mineral County Fire – Tactical Channel | 153.7700 | 203.5 PL | FM | WPZT354 |
| Mineral County Fire | Mineral County Search and Rescue | 156.2100 In 158.9100 | 88.5 PL | FM | WQDU691 |
Radio system sites in Mineral County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Mineral County
Common questions
What frequency does the fire department use in Mineral County?
Fire dispatch channels listed for Mineral County: Mineral County Fire 154.4150 MHz, FM, 203.5 PL.
What scanner do I need to listen to fire and EMS in Mineral County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Mineral County?
For Mineral County, start with the Kinkaid Peak (E of Hawthorne) site of Nevada Shared Radio System (EDACS). Its control channels are 858.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Mineral County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Mineral County are marked encrypted.