About Humboldt County Fire and EMS Frequencies
Quick answer: Fire dispatch for Humboldt County: Humboldt County Fire 155.0250 MHz, FM, no tone. EMS dispatch for Humboldt County: Humboldt County EMS 155.7450 MHz, P25, NAC 4AA.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Humboldt County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Humboldt County Fire | Humboldt County Fire/EMS Paging | 155.0250 | FM | KKC618 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Humboldt County Fire | Humboldt County Fire Tactical | 153.7700 In 154.4150 | NAC 7F3 | P25 | WNHQ521 |
| Humboldt County Fire | Humboldt County Rural Fire Tactical | 155.0850 In 155.8800 | NAC 500 | P25 | WQYJ425 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Humboldt County EMS | Humboldt County EMS Dispatch | 155.7450 In 153.9275 | NAC 4AA | P25 | WQXK504 |
Radio system sites in Humboldt County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Humboldt County
Common questions
What frequency does the fire department use in Humboldt County?
Fire dispatch channels listed for Humboldt County: Humboldt County Fire 155.0250 MHz, FM, no tone.
What frequency does EMS or the ambulance service use in Humboldt County?
EMS dispatch channels listed for Humboldt County: Humboldt County EMS 155.7450 MHz, P25, NAC 4AA.
What scanner do I need to listen to fire and EMS in Humboldt County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Humboldt County?
For Humboldt County, start with the Golconda Summit (I-80 E of Golconda) site of Nevada Shared Radio System (EDACS). Its control channels are 851.4375, 852.05 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Humboldt County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Humboldt County are marked encrypted.