Skip to content

Bladen Fire and EMS Frequencies

We do not have frequencies listed specifically for Bladen in Webster County, Nebraska yet. Countywide channels for Webster County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Holstein (Adams County), about 10 miles away.

About Bladen Fire and EMS Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Webster County channels that also cover Bladen

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County FireWebster County Fire – Fire Ground39.8400FMKNHW819

EMS Tactical

EMS Tactical frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County EMSWebster County EMS – Tactical Channel39.8200FMKNHW819

Nearest trunked radio sites

Distances are measured from the center of Bladen.

Holstein · Adams County
Site 2 (hex 2) · about 10 mi away
Control 453.5125
Voice 453.225, 453.7625
Ayr · Nebraska State Radio System
RFSS 1 · Site 89 (hex 59) · NAC B8F · about 13 mi away
Control 152.51, 152.69
Voice 152.03, 152.18
Ayr · Adams County
Site 4 (hex 4) · about 13 mi away
Control 453.4875
Voice 453.2, 453.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Bladen?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bladen?

For Bladen, start with the Holstein site of Adams County. Its control channels are 453.5125 MHz. Program a control channel first; the scanner finds the voice channels from it.