Skip to content

Washington County Fire and EMS Frequencies

Washington County in Nebraska has 1 countywide conventional frequency and 10 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Washington County Fire and EMS Frequencies

Quick answer: Fire dispatch for Washington County: Washington County Fire 156.2025 MHz, narrow FM, CSQ. Trunked: Omaha Regional Interoperability Network (ORION), for example Washington County Fire talkgroup 2049 (hex 801).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Omaha Regional Interoperability Network (ORION): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington County, start with the Blair site of Omaha Regional Interoperability Network (ORION). Its control channels: 857.9625, 858.2125, 858.4625 MHz.

Data updated .

Washington County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireFire Paging (Linked TG 2049 on ORION)156.2025CSQFMNWQDW478

Washington County trunked talkgroups

Omaha Regional Interoperability Network (ORION)

Omaha Regional Interoperability Network (ORION) talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireWashington County Fire – Dispatch2049801D
Washington County FireFire/LE20077d7D
Washington County FireWashington County Fire – Fire Ground2050802D
Washington County FireWashington County Fire – Fire Ground2051803D
Washington County FireWashington County Fire – Fire Ground2052804D
Washington County FireFireground 5/Training2053805D
Washington County FireFireground 6/Training2054806T
Washington County FireFire Training2055807D
Washington County FireTanker Operations2057809D
Washington County EMSMed Helo2056808D

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

Blair · Omaha Regional Interoperability Network (ORION)
RFSS 1 · Site 3 (hex 3) · NAC 143
Control 857.9625, 858.2125, 858.4625, 858.7125
Voice 855.3625, 855.4875, 855.9625, 856.4375, 856.9375, 857.4375, 857.4625, 857.9375, 858.2875, 858.4375, 858.4875, 858.9375, 859.2875, 859.4375, 859.4875, 859.9375, 860.4375, 860.4875, 860.9375
Telbasta · Omaha Regional Interoperability Network (ORION)
RFSS 1 · Site 12 (hex C) · NAC 14C
Control 856.8125, 859.4125
Voice 855.4875, 855.5875, 855.9625, 856.4375, 856.9375, 857.4375, 857.9375, 858.2875, 858.3125, 858.4375, 858.4875, 858.9375, 859.2875, 859.3125, 859.3375, 859.4375, 859.4875, 859.9375, 860.3375, 860.4375, 860.4875, 860.9375
Washington County Simulcast · Omaha Regional Interoperability Network (ORION)
RFSS 1 · Site 15 (hex F) · NAC 14F
Control 853.425, 854.7375, 856.1875
Voice 851.1, 851.4125, 851.7625, 857.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency does the fire department use in Washington County?

Fire dispatch channels listed for Washington County: Washington County Fire 156.2025 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Washington County?

Yes. Fire and EMS talkgroups are listed for Omaha Regional Interoperability Network (ORION): 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Washington County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the Blair site of Omaha Regional Interoperability Network (ORION). Its control channels are 857.9625, 858.2125, 858.4625, 858.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Washington County are marked encrypted.

Are Washington County fire and EMS talkgroups encrypted?

None of the 10 talkgroups listed for Washington County are marked encrypted.