Skip to content

Seneca Fire and EMS Frequencies

We do not have frequencies listed specifically for Seneca in Thomas County, Nebraska yet. Countywide channels for Thomas County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Thedford (Nebraska State Radio System), about 14 miles away.

About Seneca Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Seneca: Thomas County Fire 155.4900 MHz, narrow FM, 125 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Thomas County channels that also cover Seneca

Fire Dispatch

Fire Dispatch frequencies for Thomas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Thomas County FirePolice/Fire Dispatch Reg155.4900
In 158.9100
125 DPLFMNWPZY221

Nearest trunked radio sites

Distances are measured from the center of Seneca.

Thedford · Nebraska State Radio System
RFSS 1 · Site 47 (hex 2F) · about 14 mi away
Control 155.7, 156.21
Voice 155.0625, 155.3625
Tryon · Nebraska State Radio System
RFSS 1 · Site 97 (hex 61) · about 34 mi away
Control 155.925
Voice 154.2875, 155.115, 156.615
Whitman · Nebraska State Radio System
RFSS 1 · Site 54 (hex 36) · about 35 mi away
Control 155.1675
Voice 154.2125, 154.6575, 154.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Seneca?

We do not have a fire dispatch channel listed specifically for Seneca. The county-level fire dispatch channels in the same county: Thomas County Fire 155.4900 MHz, narrow FM, 125 DPL.

What scanner do I need to listen to fire and EMS in Seneca?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Seneca?

For Seneca, start with the Thedford site of Nebraska State Radio System. Its control channels are 155.7, 156.21 MHz. Program a control channel first; the scanner finds the voice channels from it.