Skip to content

Sioux County Fire and EMS Frequencies

Sioux County in Nebraska has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Sioux County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sioux County: Sioux County Fire 154.7325 MHz, narrow FM, 136.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sioux County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sioux County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sioux County FireFire Paging South154.7325136.5 PLFMNWQDI473
Sioux County FireFire Paging North154.9425127.3 PLFMNWQDI473

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sioux County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sioux County FireHarrison Fire Tactical153.7775FMNWQFZ569

Radio system sites in Sioux County

Program the control channel first; your scanner finds the voice channels from it.

Harrison · Nebraska State Radio System
RFSS 1 · Site 33 (hex 21) · NAC B81
Control 155.6625, 156.1425
Voice 154.1825, 155.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sioux County

Common questions

What frequency does the fire department use in Sioux County?

Fire dispatch channels listed for Sioux County: Sioux County Fire 154.7325 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Sioux County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sioux County?

For Sioux County, start with the Harrison site of Nebraska State Radio System. Its control channels are 155.6625, 156.1425 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sioux County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Sioux County are marked encrypted.