Skip to content

Sheridan County Fire and EMS Frequencies

Sheridan County in Nebraska has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Sheridan County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sheridan County: Sheridan County Fire 460.0500 MHz, narrow FM, 136.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Sheridan County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sheridan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sheridan County FireSheridan County Fire – Dispatch460.0500
In 465.0500
136.5 PLFMNWQAZ692

Radio system sites in Sheridan County

Program the control channel first; your scanner finds the voice channels from it.

Rushville · Nebraska State Radio System
RFSS 1 · Site 38 (hex 26)
Control 155.565, 155.865
Voice 154.8075, 155.0925
Whiteclay · Nebraska State Radio System
RFSS 1 · Site 39 (hex 27)
Control 154.6725, 155.4375
Voice 154.3625, 155.0325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sheridan County

Common questions

What frequency does the fire department use in Sheridan County?

Fire dispatch channels listed for Sheridan County: Sheridan County Fire 460.0500 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Sheridan County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sheridan County?

For Sheridan County, start with the Rushville site of Nebraska State Radio System. Its control channels are 155.565, 155.865 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sheridan County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Sheridan County are marked encrypted.