Skip to content

Plainview Fire and EMS Frequencies

Plainview in Pierce County, Nebraska has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Niobrara (Nebraska State Radio System), about 20 miles away.

About Plainview Fire and EMS Frequencies

Quick answer: Fire dispatch for Plainview: Plainview Fire 154.1450 MHz, FM, no tone. Trunked: Nebraska State Radio System, for example Pierce County Fire talkgroup 54003 (hex d2f3).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Plainview, start with the Niobrara site of Nebraska State Radio System, about 20 miles away. Its control channels: 156.1275 MHz.

Data updated .

Plainview conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Plainview
AgencyDescriptionFrequency (MHz)ToneModeFCC
Plainview FirePlainview Fire – Dispatch154.1450FM—

Pierce County channels that also cover Plainview

Fire Dispatch

Fire Dispatch frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FirePierce County Fire – Dispatch – South154.2050134 DPLFMNWQGZ377
Pierce County FirePierce County Fire – Dispatch – North154.2050243 DPLFMNWQGZ377

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FireCounty Fireground153.8675FMN—
Pierce County FireCounty Fireground153.9575FMN—
Pierce County FireCounty Fireground154.3025FMN—
Pierce County FireCounty Fireground155.1225FMN—

Nebraska State Radio System

Nebraska State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Pierce County FireFire and Rescue54003d2f3D

Nearest trunked radio sites

Distances are measured from the center of Plainview.

Niobrara · Nebraska State Radio System
RFSS 1 · Site 61 (hex 3D) · about 20 mi away
Control 156.1275
Voice 154.695, 155.37, 155.6025
Elgin · Nebraska State Radio System
RFSS 1 · Site 63 (hex 3F) · about 25 mi away
Control 155.3175, 155.505
Voice 154.7625, 154.9425
Norfolk 800 · Nebraska State Radio System
RFSS 1 · Site 95 (hex 5F) · about 28 mi away
Control 854.1625, 854.3125, 854.4625
Voice 854.0125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Plainview?

Fire dispatch channels listed for Plainview: Plainview Fire 154.1450 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Plainview?

Yes. The county-level systems that cover Plainview are Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Plainview?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Plainview?

For Plainview, start with the Niobrara site of Nebraska State Radio System. Its control channels are 156.1275 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Plainview fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Plainview are marked encrypted.