About Lancaster County Fire and EMS Frequencies
Quick answer: Fire dispatch for Lancaster County: Rural Fire 154.2950 MHz, narrow FM, no tone. Trunked: Lancaster County, for example Lancaster County Fire talkgroup 12550 (hex 3106).
- 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Lancaster County: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lancaster County, start with the Lincoln-Lancaster County Simulcast site of Lancaster County. Its control channels: 854.6875, 856.2125, 856.4625 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Lancaster County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rural Fire | South Paging | 154.2950 | FMN | WQAF254 | |
| Rural Fire | North Paging | 154.3550 | FMN | WQAE795 | |
| Rural Fire | Military Dispatch Tower | 851.7500 In 806.7500 | 123.0 PL | FMN | WQAS840 |
| Rural Fire | Jensen Park Dispatch Tower | 851.8125 In 806.8125 | 123.0 PL | FMN | WQAU827 |
| Rural Fire | Hallam Dispatch Tower | 853.1625 In 808.1625 | 123.0 PL | FMN | WQAS235 |
| Rural Fire | Ceresco Dispatch Tower | 853.1875 In 808.1875 | 123.0 PL | FMN | WQAY625 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lancaster County Fire | Lancaster County Fire – Tactical Channel | 855.4625 | NAC 1C8 | P25 | WNDX303 |
| Rural Fire | Mutual Aid | 851.3000 In 806.3000 | 156.7 PL | FMN | WPYS986 |
| Rural Fire | Mutual Aid | 851.6625 In 806.6625 | 156.7 PL | FMN | WQNI317 |
| Rural Fire | Hallam Tower Tactical | 851.9750 In 806.9750 | 162.2 PL | FMN | WQAU765 |
| Rural Fire | Rural Fire – Fire Ground | 852.8000 In 807.8000 | 123.0 PL | FMN | WQBQ532 |
| Rural Fire | Rural Fire – Fire Ground | 852.8250 In 807.8250 | 123.0 PL | FMN | WQBQ532 |
| Rural Fire | Military Tower Tactical | 854.0125 In 809.0125 | 162.2 PL | FMN | WQAS840 |
| Rural Fire | Jensen Park Tower Tactical | 854.5875 In 809.5875 | 162.2 PL | FMN | WQAU827 |
| Rural Fire | Ceresco Tower Tactical | 856.9625 In 811.9625 | 162.2 PL | FMN | WQAY625 |
Lancaster County trunked talkgroups
Lancaster County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lancaster County Fire | Rural Fire/Rescue Paging | 12550 | 3106 | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| University of Nebraska - Lincoln | UNL Police/Fire | 12168 | 2f88 | D Encrypted |
| University of Nebraska - Lincoln | UNL Police/Fire | 12169 | 2f89 | D Encrypted |
| University of Nebraska - Lincoln | UNL Police/Fire | 12170 | 2f8a | D Encrypted |
Radio system sites in Lancaster County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Lancaster County
Common questions
What frequency does the fire department use in Lancaster County?
Fire dispatch channels listed for Lancaster County: Rural Fire 154.2950 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Lancaster County?
Yes. Fire and EMS talkgroups are listed for Lancaster County: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lancaster County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lancaster County?
For Lancaster County, start with the Lincoln-Lancaster County Simulcast site of Lancaster County. Its control channels are 854.6875, 856.2125, 856.4625, 859.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lancaster County fire and EMS frequencies encrypted?
None of the 15 conventional frequencies listed for Lancaster County are marked encrypted.
Are Lancaster County fire and EMS talkgroups encrypted?
3 of the 4 talkgroups listed for Lancaster County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.