About Knox County Fire and EMS Frequencies
Quick answer: Fire dispatch for Knox County: Knox County Fire 155.5275 MHz, narrow FM, 110.9 PL. EMS dispatch for Knox County: Knox County EMS 154.9650 MHz, narrow FM, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Knox County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County Fire | Knox County Fire – Dispatch | 155.5275 | 110.9 PL | FMN | WPVB556 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County EMS | EMS Paging | 154.9650 | FMN | — |
Radio system sites in Knox County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Knox County
- Addison
- Bazile Mills
- Bloomfield
- Bohemia
- Center
- Central
- Cleveland
- Columbia
- Creighton
- Crofton
- Dolphin
- Dowling
- Dukeville
- Eastern
- Frankfort
- Harrison
- Herrick
- Hill
- Jefferson
- Jelen
- Knoxville
- Lincoln
- Lindy
- Logan
- Mars
- Miller
- Morton
- Niobrara
- North Frankfort
- Peoria
- Pishelville
- Raymond
- Santee
- Spade
- Sparta
- Union
- Valley
- Venus
- Verdel
- Verdigre
- Walnut
- Walnut Grove
- Washington
- Wausa
- Western
- Winnetoon
Common questions
What frequency does the fire department use in Knox County?
Fire dispatch channels listed for Knox County: Knox County Fire 155.5275 MHz, narrow FM, 110.9 PL.
What frequency does EMS or the ambulance service use in Knox County?
EMS dispatch channels listed for Knox County: Knox County EMS 154.9650 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Knox County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Knox County?
For Knox County, start with the Niobrara site of Nebraska State Radio System. Its control channels are 156.1275 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Knox County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Knox County are marked encrypted.