About Alda Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Alda: Hall County Fire 152.0075 MHz, narrow FM, no tone.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Hall County channels that also cover Alda
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hall County Fire | Hall County Fire – Paging | 152.0075 | FMN | KNCF623 | |
| Hall County Fire | Fire/EMS Dispatch | 453.4750 In 458.4750 | 127.3 PL | FMN | WNLS589 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hall County Fire | Fire/EMS Operations | 460.5875 | 632 DPL | FMN | WQXW801 |
Nearest trunked radio sites
Distances are measured from the center of Alda.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Alda?
We do not have a fire dispatch channel listed specifically for Alda. The county-level fire dispatch channels in the same county: Hall County Fire 152.0075 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Alda?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Alda?
For Alda, start with the Kenesaw site of Adams County. Its control channels are 460.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.