About Gage County Fire and EMS Frequencies
Quick answer: Fire dispatch for Gage County: Gage County Fire 154.1300 MHz, narrow FM, no tone.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Gage County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gage County Fire | County Fire Paging | 154.1300 In 452.2250 | FMN | — | |
| Gage County Fire | County Fire Paging | 163.2500 In 452.2250 | FMN | WNLA329 | |
| Gage County Fire | County Fire Paging | 452.2250 | 118.8 PL | FMN | WNLA329 |
| Gage County Fire | County Fire Northwest | 453.1500 In 458.1500 | 173.8 PL | FMN | WQQR776 |
| Gage County Fire | County Fire North | 453.3000 In 458.3000 | 173.8 PL | FMN | WQAB584 |
| Gage County Fire | County Fire South | 453.9500 In 458.9500 | 173.8 PL | FMN | WQAB584 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gage County Fire | County Hazmat | 460.1750 | 173.8 PL | FMN | WPZJ770 |
Radio system sites in Gage County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Gage County
Common questions
What frequency does the fire department use in Gage County?
Fire dispatch channels listed for Gage County: Gage County Fire 154.1300 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Gage County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Gage County?
For Gage County, start with the Beatrice site of Nebraska State Radio System. Its control channels are 155.19, 155.655 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Gage County fire and EMS frequencies encrypted?
None of the 7 conventional frequencies listed for Gage County are marked encrypted.