Skip to content

Max Fire and EMS Frequencies

We do not have frequencies listed specifically for Max in Dundy County, Nebraska yet. Countywide channels for Dundy County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Benkelman (Nebraska State Radio System), about 6 miles away.

About Max Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Max: Dundy County Fire 159.4050 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Dundy County channels that also cover Max

Fire Dispatch

Fire Dispatch frequencies for Dundy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dundy County FireDundy County Fire – Dispatch159.4050FMNWPQZ632

Nearest trunked radio sites

Distances are measured from the center of Max.

Benkelman · Nebraska State Radio System
RFSS 1 · Site 84 (hex 54) · NAC B84 · about 6 mi away
Control 154.4375, 154.665, 154.92
Voice 154.235
Imperial · Nebraska State Radio System
RFSS 1 · Site 49 (hex 31) · NAC B81 · about 30 mi away
Control 155.805, 156.12
Voice 155.25, 155.505
Hayes Center · Nebraska State Radio System
RFSS 1 · Site 48 (hex 30) · NAC 144 · about 34 mi away
Control 155.37, 155.655
Voice 154.785, 155.07
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Max?

We do not have a fire dispatch channel listed specifically for Max. The county-level fire dispatch channels in the same county: Dundy County Fire 159.4050 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Max?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Max?

For Max, start with the Benkelman site of Nebraska State Radio System. Its control channels are 154.4375, 154.665, 154.92 MHz. Program a control channel first; the scanner finds the voice channels from it.