About Dixon County Fire and EMS Frequencies
Quick answer: Fire dispatch for Dixon County: Dixon County Fire 154.7925 MHz, narrow FM, 331 DPL. EMS dispatch for Dixon County: Dixon County EMS 458.9750 MHz, narrow FM, 624 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Dixon County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dixon County Fire | Dixon County Fire – Dispatch | 154.7925 In 158.9925 | 331 DPL | FMN | WQFE392 |
| Dixon County Fire | Dixon County Fire – Dispatch | 154.8825 In 159.2175 | 365 DPL | FMN | WQFE392 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dixon County EMS | Wakefield Fire/EMS Paging | 458.9750 | 624 DPL | FMN | WQI498 |
| Dixon County EMS | Dixon County EMS – Dispatch | 460.1000 | 114 DPL | FMN | WQI498 |
Radio system sites in Dixon County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Dixon County
Common questions
What frequency does the fire department use in Dixon County?
Fire dispatch channels listed for Dixon County: Dixon County Fire 154.7925 MHz, narrow FM, 331 DPL.
What frequency does EMS or the ambulance service use in Dixon County?
EMS dispatch channels listed for Dixon County: Dixon County EMS 458.9750 MHz, narrow FM, 624 DPL.
What scanner do I need to listen to fire and EMS in Dixon County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Dixon County?
For Dixon County, start with the Ponca site of Nebraska State Radio System. Its control channels are 155.4375, 155.925 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Dixon County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Dixon County are marked encrypted.