Skip to content

Custer County Fire and EMS Frequencies

Custer County in Nebraska has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 46 cities and communities below for local fire departments and EMS agencies.

About Custer County Fire and EMS Frequencies

Quick answer: Fire dispatch for Custer County: Custer County Fire 152.0075 MHz, narrow FM, CSQ. EMS dispatch for Custer County: Custer County EMS 462.9500 MHz, narrow FM, 127.3 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Custer County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Custer County FireFire/EMS Dispatch152.0075CSQFMNWNRX734
Custer County FireOconto154.8000
In 155.8500
141.3 PLFMNWNRX734

EMS Dispatch

EMS Dispatch frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Custer County EMSMed462.9500
In 467.9600
127.3 PLFMNWNRW498

Radio system sites in Custer County

Program the control channel first; your scanner finds the voice channels from it.

Merna · Nebraska State Radio System
RFSS 1 · Site 40 (hex 28)
Control 155.535, 155.955
Voice 155.01, 155.2425
Sargent · Nebraska State Radio System
RFSS 1 · Site 57 (hex 39)
Control 155.52, 155.73
Voice 154.295, 154.905
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Custer County

Common questions

What frequency does the fire department use in Custer County?

Fire dispatch channels listed for Custer County: Custer County Fire 152.0075 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Custer County?

EMS dispatch channels listed for Custer County: Custer County EMS 462.9500 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Custer County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Custer County?

For Custer County, start with the Merna site of Nebraska State Radio System. Its control channels are 155.535, 155.955 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Custer County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Custer County are marked encrypted.